May
15
DIY Concrete Basement Crack Repair
Filed Under Basement & Attic, Home Care, Home Improvements, Repairs
There is some foam material that is used to cover foundation cracks that have been poured, and this form of cover is injected into the crack. This process will take less than an hour, since it involves installing of injection ports before sealing the surface. You will then be required to inject the crack beginning from the lowest port in a sustained manner, such that the injected material starts to ooze out through the top.
You then plug the first potty with some provided caps before moving on to other places. Repeat the process until the whole crack has been filled. You will finally be required to allow a twenty four to forty eight hour period for the whole filling to dry up and completely seal the cracks before removing the ports. The drying is supposed to take place at room temperature and the excess filling can be removed using a surface seal that can be easily stuck on the crack and then pulled off.
Comments
Leave a Reply